Author: MazdaMitch
-
How to Re-Index your Torsion Bars
Note: Not the best write up with pictures. Better version with video coming soon. Tools Needed: I WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE OR MISTAKES. Step OneLoosen the lug nuts on your wheels.Jack up the truck, and put the jack stands on the frame rails.I put mine right behind the front cab mount.This…
-
How To Adjust Fast Idle on The Weber 32/36 Carburetor
The video demonstrates setting a fast idle cam on a Weber 32/36 carburetor’s electric choke. Initially, pressing the gas pedal activates the first cam stage at 2000 rpm. After 15-20 seconds, a second press moves the cam to 1000-1100 rpm. Before driving, a final press lowers it to 850 rpm.
-
How To Adjust Your Fast Idle on The Weber 32/36
In this video, I explain the Weber 32/36 carburetors two-stage cam on the electric choke. I also show how I adjust it. My first stage idle is set at 2000 rpm, second stage is at 1000-1100 rpm. After its warm the idle is at 850 rpm after I press the gas pedal one last time.…
-
Why You Should Always Buy OEM Motor Mounts
There is that old saying “sometimes you get what you pay for” and for the most part it’s true. I was needing to replace my motor mounts and wanted to save some money. So I figured that all motor mounts are the same and that I would go with the cheapest. I went with the…
-
Suspension Component Replacement
Mazda Mitch replaced suspension and steering components on a truck with MevoTech parts instead of Moog, suggesting Moog for better quality. They encountered unexpected grease fittings, requiring modifications, and found the upper control arm shaft and bushing inferior to Moog, highlighting the importance of quality parts for vehicle maintenance.
-
Sealing Intake Vacuum Ports Without Welding
The video demonstrates a method for sealing vacuum ports on an intake without welding, which is helpful for those transitioning from stock carburetors to Weber carburetors. It highlights the drawbacks of rubber caps, including deterioration and vacuum leaks, and lists the tools and materials used for the process.
-
3d printed Shift Knob
I created a 3D printed shift knob with a SoundBot Bluetooth phone and audio controller in the top of it.
-
Power Locks and Power Windows
In this video I show you how I installed the power locks and the universal power window kit that I installed on my Mazda B2200. Using a cellphone to record, it increases the audio, to me the phone makes the windows 30% louder than it actually is. When I get my new window run channels,…