Oem flasher relay &led

Mrcrowley

Hey guy I got a ? When I'm lookin up my flasher relay all I'm finding is a 2 prong and mine is a 3 prong but I want to upgrade to the led I'm lookin for a part number or something to help thanks

Axel-Breaker-Earl

I'm not positive on this, but I believe others have just used a certain value in-line resistors to be able to use the stock flasher with LED bulbs. I have NOT done this, but do remember reading something about this several years ago from some forum or one of the FB groups for our Mazda trucks.

Maybe someone more experienced with LED lighting could offer some more direction or advice......

RRSpikes

Novita EP33 is one of the flashers that'll work properly with LEDs.

You can modify your existing flasher to work with LEDs by removing the resistor labeled R1.

Mrcrowley

RRSpikes just take it out or do I gotta replace it with something

MazdaMitch

Mrcrowley from his post it looks like all you have to do is desolder that and pull it right out.

RRSpikes

Mrcrowley

Some say you need to replace it with a higher value resistor and some say you don't.

I pulled the R1 resistor in late 2018 and haven't had any issues.

OldTrucksRock

Couple weeks ago I bought two LED amber turn signal bulbs off Amazon, no hyperflash because the LED's have the resistor built in:

https://www.amazon.com/dp/B0BBZVTV8X?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

kz6fittycent

You do NOT need resistors. Get one of these - I have LED flashers up front, and will be replacing the rest of my bulbs w/ LEDs as needed. It's a direct replacement and fits perfectly. Zero issues.

Mrcrowley

kz6fittycent mine is a 2 plug not 3 so would it still work?