Tag: Cylinder head

Above is the torque sequence for the B2200 cylinder head. Torque should be done in 20 lb/ft. steps until final torque. Torque numbers are below start with bolt one. Bolts 1-10: 59-64 ft/lbs.Re-torque bolts at 64 ft/lbs after the engine has gone through a few heat cycles. Bolt and block threads should always be cleaned…

Ok, first of all, for those of you who have not had the opportunity to examine the F2 and the FE cylinder head we will start off with some basic pictures and description. Below are several pictures that should give you a good reference. The head is a very basic design for the most part.…