Torque Specs

—

by

Mazda Torque Specs for B2200

Motor Mounts 27-46 ft-lb

Thermostat Housing 14-19 ft-lb

Intake Manifold 14-19 ft-lb

Alternator and Alternator Bracket 27-46 ft-lb

Manual Fuel Pump 14-19 ft-lb

Engine Hoist Brackets 14-22 ft-lb

Timing Covers 61-87 inch-lb

Timing Belt Tensioner 27-38 ft-lb

Valve Cover or Cylinder Head Cover 26-35 inch-lb

Front Housing Plate 14-19 ft-lb

Exhaust Manifold 16-21 ft-lb

Engine to Trans bolts 35 ft-lb

Main Caps:
First Step: hand tight Sec Step: 25-30 lb/ft 3rd Step: 61-65 lb/ft

Rod Bolts:
First Step: hand tight Sec Step: 25-30 lb/ft

3rd Step: 48-51 lb/ft

Rear Main Seal:
First Step: 69-104 lb/in
*Editor recommends 120-132 lb/in

Oil Pump:
First Step: 14-19 lb/ft

Oil Sump:
First Step: 69-104 lb/in
*Editor recommends 120-132 lb/in

Oil Pan:
First Step: 61-104 lb/in
*Editor recommends 120-132 lb/in

Water Pump:
First Step: 14-19 lb/ft

Timing Belt Tensioner and Idler Pulley: First Step: 27-38 lb/ft

Harmonic Balancer (10 mm):
First Step: 9-13 lb/ft
Note: Overtorqing will lead to a broken bolt.

Flywheel:
First Step: 71-76 lb/ft
Note: Apply sealant and tighten in star pattern.

Clutch Pressure Plate:
First Step: 13-20 lb/ft
Note: Tighten in star pattern.

Flex Plate (AT only):
First Step: 71-76 lb/ft
Note: Apply sealant and tighten in star pattern.

Rocker Arm Shaft Assembly 13-20 ft-lb
First Step: Hand Tight
Sec Step: 13-20 lb/ft

Note: Do not over torque stripping of the aluminum threads may occur.

Cylinder Head:
First Step: 20 lb/ft Sec Step: 40 lb/ft 3rd Step: 59-64 lb/ft

Cam Sprocket:
First Step: 35-48 lb/ft

Lower Timing Sprocket (21 mm): First Step: 116-123 lb/ft

Distributor Housing: First Step: 14-19 lb/ft

Comments