91 B2200 Hazard Flasher Switch Problem ?

Red91EFI

My Hazard Flasher switch only activates the Left side front and rear turn signal lights. Nothing on the Right side. All four turn signal lights work properly when I use the LH and RH turn signals . I just noticed this since I've very rarely needed the hazard lights. I'm thinking it might be the Hazard light switch ?
Anybody have experience with this issue ?
THANKS

kz6fittycent

Red91EFI yeah mine does that. I just toggle the switch a few times and all 4 will light up lol. It's probably just some dirt inside the switch's contacts.

Cusser

I've never had that situation, but also have rarely used my flashers. I'd take off the steering wheel cover and re-connect the harness to the hazard switch. If that didn't help, I'd take my multimeter and test the switch itself; if bad, I'd replace that switch or try to take it apart to fix/clean it.

No - not posting any photos of Mrs. Cusser flashing.....

Red91EFI

kz6fittycent

Thanks for the advice, I toggled the hazard light switch around ten times and now the hazard lights work properly. Must have been years of dust from not using the the switch.

MazdaMitch

Red91EFI yep when things get old, sometimes you have to fiddle with it a bit longer 😆