Gasket thickness for intake

Will

I'm needing a gasket for my intake but I don't want to order a whole kit right now. I'm using some gasket material but I'm wondering what thickness I should use for it. It's not the intake to the block, it's the intake to the plenum I believe it's called, I'll put in a video to show.

Anyway my question is what thickness should I use for the gasket, I have a kit with some pieces for this engine and I measured the thickness and it was 1mm, the stuff I bought at canadian tire is 1/32 or like .79mm, is that good enough or should I go thicker? What do you guys recommend.

Thanks all

MazdaMitch

Will Currently cant upload a video directly, but you can upload to streamable, its free, and post the link in here.
https://streamable.com/

Also I have most of the gasket here on the site so that you can cut your own, but I use the felpro material from Advance Auto.

Part # 3157

https://mazdaminitruckin.com/make-your-own-gaskets/

Will

Will https://streamable.com/3b48hf

Axel-Breaker-Earl

You should be good with the gasket material that you have.

Will

MazdaMitch I got "3023 karropak tan fiber sheet", saw you recommended rubber gasket, would this work do you think?

MazdaMitch

Will awesome using a smoke tester to find leaks.

Yes the standard gasket material at the parts store like I mentioned should work just fine.

I don't think I have it in my gaskets on this website but you could probably take that in take off and just simply use the old one as a template and make a new one.

Axel-Breaker-Earl

I think the FelPro gaskets are metal......for that location......and I have a few of them. Most of the time I never take the manifold apart there, and just leave it all together. If you want of them, let me know, just pay for the shipping.

For the time being, your gasket material should work fine there, I would think.