MazdaMitch PurpleHaze Running a Webber. I just order ur B plate to cover the side (EGR). Thanks for the support. It will ship tomorrow.
MazdaMitch PurpleHaze looks correct. I see you have a screw on what looks like the vent line like you're trying to close the vent off, but I wouldn't do that. I've never done that it may be fine, but what if it needs that vent to operate??
PurpleHaze MazdaMitch It’s was originally there when I bought the truck. So take the crew out and let it breathe?
PurpleHaze MazdaMitch Thank you Sir! I will try it after, I am going to plug all the line holes today.
Cusser Make sure your Weber adapter plates are sanded perfectly flat on a sheet of glass, and use Permatex Aviation (not RTV) on the gaskets, and torque properly.
PurpleHaze MazdaMitch I tried but same results. I am going to start all over and try again. I use the settings you posted on how to tune Weber carb . Will let u know how I make out.
Cusser PurpleHaze I use the settings you posted on how to tune Webber carb Spell it "Weber", will make it available when folks use search !
